Using The Conexiocom (Optional) - KaVo Primus 1058 Life TM Instructions For Use Manual

4.7.4 Using the CONEXIOcom (optional)

Note
To start the CONEXIOcom menu, no handpiece may be removed.
Note
For all CONEXIOcom functions, the dental unit must be connected to an in-
stallation of the KaVo "CONEXIO" software.
The function of the CONEXIOcom menu is to control the display of previously
recorded and saved images and videos. In order to use the function, the unit
must have access to the data of the KaVo Software "CONEXIO" software. For
details on the configuration, please refer to the "CONEXIO" installation instruc-
tions.
Opening the CONEXIOcom menu
To display existing images, take the camera off the holder. Select the proper
patient on the corresponding PC for this purpose. It is also feasible to automat-
ically transfer the patient from your invoicing programme to CONEXIO. For de-
tails on the configuration, please refer to the "CONEXIO" installation instruc-
tions.
If no patient is selected, images from the clipboard are displayed. If the clip-
board is empty, no image is displayed. The clipboard is deleted automatically
when the patient is logged off the corresponding PC.
The CONEXIOcom menu is opened automatically for recording of images or
videos as soon as a device (DIAGNOcam U, ERGOcam One) is taken out.
To close CONEXIOcom: Replace the active device.
Display CONEXIOcom
No Icon
1 -
2 -
4 Operation | 4.7 Using functions through the menu
Setting
Info line
This line displays the active patient name (if selected
in CONEXIO) under which the acquired data are
stored.
If no patient is selected, images and videos are
stored temporarily in the clipboard under "unas-
signed patient".
If a device is active, the device type is shown. The
following is implemented at this time:
DIAGNOcam U
ERGOcam One
75 / 126
Instructions for use Primus 1058 Life