Waters 2690 Quick Start Manual page 16

4. Enter a time period (in minutes) after which you want the Separations Module to
shut down (or press
5. Press OK.
for the specified period.
6. Press Exit
Note: If you want to use Auto Shutdown to turn off the lamp of a 2487 or 486 detector,
program a Lamp Off event and specify a time of INIT in the I/O Events Timed Table screen
(see Section 6.2.5, Setting I/O Parameter Values in the Waters 2690 Separations Module
Operator's Guide).
16 Preparing the Separations Module for Operation
Clear to disable the Auto Shutdown function).
The Separations Module shuts down when there has been no activity
to return to the Main screen.