Sample Set Screen – Functional View - Waters 2690 Quick Start Manual

• Initial Conds – Starts the solvent management system at the initial conditions
(specified in the first line of the sample set) and begins equilibrating the
temperature in the sample heater/cooler and/or column heater. When the
system is equilibrated, press the
• Run – Displays the selected sample set table (to view or edit), as shown in
Figure 4-3. Use the screen keys to modify the table as necessary.
Figure 4-3 Sample Set Screen – Functional View
4. Load the sample vials into the carousel(s) according to the locations specified in
the sample set (see
5. Press the Start screen key. The Run Samples screen appears with a list of the
solvents required for the run
Separations Module with the indicated solvent(s).
Run screen key.
Section 2.4.4, Loading
(Figure 4-4). Check that you have prepared the
Carousels).
Making Automatic Runs 39