To Load The Carousels; Door Is Open Dialog Box - Waters 2690 Quick Start Manual

Table 2-2 Carousel Codes and Colors (Continued)

To load the carousels:

1. Open the carousel door. The Door is Open dialog box appears in the screen
(Figure 2-15).
2. Press the Next
the carousel turntable for loading the appropriate carousel.
3. Load the carousel into the sample compartment.
4. Repeat steps 2and 3 until all appropriate carousels are loaded.
5. Close the carousel door. If you enable the "Verify carousel placement" check box
(the default setting) in the Configuration screen, an error message appears if
you attempt to make an injection from a carousel that is in the wrong position.
Code Color
D Green
E White
Figure 2-15 Door is Open Dialog Box
screen key (or select the desired carousel screen key) to position
Preparing the Separations Module for Operation
Vial Numbers
73 to 96
97 to 120
29