Ir / Night Vision Functionality - Barco FL40 series User Manual
Hide thumbs
Also See for FL40 series:
- Quick start manual (6 pages) ,
- Quick start manual (4 pages) ,
- Quick manual (2 pages)
Table of Contents
Advertisement
Installation menu
8.1 IR / Night vision functionality
About
IR / Night Vision functionality is only available for the FS40 variant of the projector..
In combination with Night Vision Goggles (NVG), this will give a realistic rendering of the environment. This
will visualize in a realistic way, night time, dusk and dawn, and limited visibility scenarios.
The IR light source has a wavelength of 740nm
How to enable IR/Night Vision.
Enter the menu Home / Installation / Display setup and select NightVision in the scroll down menu.
Image 8-2
To set up the IR illumination, enter the menu Home/Installation/Illumination/Power. This menu shows two
sliders; one for the LED (daylight), and one for the IR LED (Night Vision). The sliders are scaled from zero –
100% power.
74
R5910123 /00
FL40 / FS40 Projectors
Advertisement
Table of Contents
