Bandwidth Control Configuration - Panasonic PN28058 Operation Manual For Cli

4.6.

Bandwidth Control Configuration

Configure bandwidth control settings in "Interface configuration mode." Display
the basic information by entering "show egress-rate-limit" in "Privileged mode."
Bandwidth control configuration command
Interface configuration mode
Bandwidth control enable command
Interface configuration mode
Bandwidth control disable command
Interface configuration mode
Bandwidth control display command
Privileged mode
.
M8eGLPWR+> enable
M8eGLPWR+# show egress-rate-limit
Port
---------
1
2
3
4
5
6
7
8
9
10
M8eGLPWR+#
Fig. 4-8 Execution example of the bandwidth control configuration and information
Bandwidth Status
------------ ---------
1000 disabled
1000 disabled
1000 disabled
1000 disabled
1000 disabled
1000 disabled
1000 disabled
1000 disabled
1000 disabled
1000 disabled
display command
egress-rate-limit [<unit(1Mbps/unit)>]
egress-rate-limit
no egress-rate-limit
show egress-rate-limit
43