Radius Configuration - Panasonic PN28080K-ID Operation Manual

3.1.14. RADIUS Configuration

Select "Basic Config" and "System Security" and then "RADIUS Configuration" to
open the screen shown in Figure 3-14. On this screen, you can configure the set-
tings of the RADIUS server that is used in IEEE802.1X authentication.
Screen Description
NAS ID Displays the authentication ID (NAS Identifier) .
Index This is the entry number for the RADIUS settings.
Server IP Displays the IP address of the RADIUS server. "0.0.0.0" is the factory default set-
Address ting.
Server IPv6 Displays the IPv6 address of the RADIUS server. "::" is the factory default setting.
Address
Shared Secret Displays the common key (Shared Secret) that is used in authentication. The same
key must be set in the server and the client. In general, the system manager sets
this secret key. The factory default setting has no secret key. Displays "encrypted"
if the key is encrypted.
Response Time Displays the maximum response time for the authentication request to the
RADIUS server. The factory default setting is 10 seconds.
Maximum Displays the number of times of retransmission for the authentication request to
Retransmission the RADIUS server. The factory default setting is 3.
Figure 3-14 RADIUS Configuration
37