Admin Firmware Tab - Cobalt Digital Inc 9223 Product Manual

Dual-channel 3g/hd/sd mpeg-4 encoder
Table of Contents

Advertisement

• SNMP Traps: This allows SNMP traps to be enabled or disabled
setting does not take effect immediately – it will become active the next time the card is
rebooted.
• MIB File Download: The 9223 provides an up-to-date copy of its MIBs. If you click
on the Save button, a zip file with the relevant MIBs will be downloaded to your
computer. This zip file contains the card MIBs, as well as the Ross Video and
openGear MIBs required to compile the card MIBs.
The Admin General Tab is depicted below:

Admin Firmware Tab

The 9223 can hold up to three distinct firmware images: a Factory image, and two upgrade
images, called Image 1 and Image 2. The Factory image can never be overwritten, and will
always be available as a fall-back in case of problems or failed updates. Image 1 and Image 2
can be updated at will. Since the card offers two upgrade images, it is always possible to fall
back to the previous image if there are any problems with the current one. The card will also
automatically fall back to the factory image if it detects a corrupted firmware image. Finally, the
push buttons on the front of the card allow for a forced override to the factory image, as
described in the Front Switches section.
Uploading a Firmware Upgrade
When applicable, Cobalt Digital Inc. provides for continual product enhancements through
software updates. As such, functions described in this manual may pertain specifically to cards
loaded with a particular software build. You can update your card by downloading the new
Update software by going to the Support>Firmware link at www.cobaltdigital.com. Download
"Firmware Update Guide", which provides simple instructions for downloading the
latest firmware for your card onto your computer, and then downloading it to your card through
DashBoard™. When the firmware upgrade file is placed in the desired location on your
computer click on the Upload button, as shown below. A dialog box allows you to select the
6
SNMP is an optional feature in the openGear™ frame controller. The 9223 SNMP functions are only available if
SNMP is licensed in the frame controller.
89
6
. Note that this
9223-OM (V2.5.0)

Advertisement

Table of Contents
loading

Table of Contents