Chapter 3 Operating Instructions; Overview; Control And Display Descriptions - Cobalt Digital Inc 9433-EMDE-75 Product Manual

Overview

If you are already familiar with
using DashBoard or a Cobalt
Remote Control Panel to control
Cobalt cards, please skip to
9433-EMDE Function Menu List
and Descriptions (p. 3-7).

Control and Display Descriptions

9433EMDE-75-110-OM (V1.6)
Operating Instructions
Chapter 3
This chapter contains the following information:
Control and Display Descriptions (p. 3-1)
•
Accessing the 9433-EMDE Card via Remote Control (p. 3-4)
•
Checking 9433-EMDE Card Information (p. 3-6)
•
9433-EMDE Function Menu List and Descriptions (p. 3-7)
•
Troubleshooting (p. 3-12)
•
This section describes the user interface controls, indicators, and displays for
using the 9433-EMDE-75/110 card. The 9433-EMDE-75/110 functions can
be accessed and controlled using any of the user interfaces described here.
The format in which the 9433-EMDE-75/110 functional controls, indicators,
and displays appear and are used varies depending on the user interface being
used. Regardless of the user interface being used, access to the
9433-EMDE-75/110 functions (and the controls, indicators, and displays
related to a particular function) follows a general arrangement of Function
Menus under which related controls can be accessed (as described in Function
Menu/Parameter Overview below).
Note: When a setting is changed, settings displayed on DashBoard™ (or a Remote
Control Panel) are the settings as effected by the card itself and reported back
to the remote control; the value displayed at any time is the actual value as set
on the card.
9433-EMDE-75/110 PRODUCT MANUAL
Chapter 3
3-1