2/ Association Of The Thermostat With The Technical Unit - DELTA DORE DELTA 8000 TA BUS Installation Instructions Manual

2/ ASSOCIATION OF THE THERMOSTAT
WITH THE TECHNICAL UNIT.
❶ Press and hold the 1st and the 4th button
for 3 seconds. Release.
❷ The screen displays CF20.
Press OK then press + and - to select the
output with which the room thermostat will be
associated.
Confirm with OK.
❸ The screen displays CF21.
Select the transmitter and press OK.
❹ The screen displays CF05.
Select the thermostat type and press OK.
1
3 s
6
2
Output
number
Transmitter
type
Thermostat
(2)
type
(2) CF05: the Master thermostat enables the
centralised use of ON/OFF and HEAT/COOL (at
least one Master thermostat is required in an
installation without a programmer).
1 to 16 depending on
the system.
Underfloor heating
0
(by default)
1 Heater
2 Ceiling or ductable
0 Zone thermostat
1 Master thermostat
EN
7