Deleting The Association Of The Thermostat With The Technical Unit; Initialising The Room Thermostat Settings - DELTA DORE DELTA 8000 TA BUS Installation Instructions Manual

4/ INITIALISATION
4.2 DELETING THE ASSOCIATION OF THE
THERMOSTAT WITH THE TECHNICAL UNIT
Press OK to open the setting, then press + and - to
select «= --».
Confirm with OK.
16
4.3 INITIALISING THE ROOM THERMOSTAT
SETTINGS
This menu restores the system
to factory settings.
❶ From the OFF mode.
Simultaneously press the 1st
and 3rd buttons from the left
(i) for 10 seconds. The screen
displays rSt1. Release.
❷ Press and hold OK for
10 s
3 seconds until the rSt display
flashes. Release.
The system automatically
returns to OFF mode.
10 s
10 s
3 s
3 s
EN
17