2/ Association Of The Thermostat With The Wireless Gateway - DELTA DORE DELTA 8000 TAP RF Installation Instructions Manual

2/ ASSOCIATION OF THE THERMOSTAT
WITH THE WIRELESS GATEWAY
On the gateway: Press and hold the left
hand side button for 3 seconds until LED
On the thermostat:
Turn the selector knob to
Press and hold the second button from
the left for 3 seconds, then release.
The screen displays Ln01.
Press OK to display the number of
associated products.
Press and hold OK for 3 seconds to
associated.
number of products found. When the
LED 1 on the wireless gateway
6
3 s
.
>3s
The screen displays CF20.
Press OK to open the setting, then press
+ and - to select the output with which
the room thermostat will be associated.
The screen displays CF21.
Press OK to open the setting, then press
+ and - to select the type of transmitter.
The screen displays CF22.
Press OK to open the setting, then press
+ and - to select the limitation value.
Press or turn the selector knob to exit the active mode.
Output number
Transmitter type
>3s
Heating percen-
tage limitation
1 to 16 depending on the system.
0
1 Heater
From 10 to 100% in increments of 10
EN
7