Menu 2-17 Resetting The Boiler/Heat Pump Operating Hours Meter; Associating To The Tydom App; Association With A Door/Window Magnetic Contact; Association With A Phone Transmitter - DELTA DORE Tybox 1137 Installation And User Manual

Menu 2-17 Resetting the boiler/heat pump operating hours meter

Default setting: Off

6. Associating to the Tydom app

Open the Tydom app on your smartphone or tablet, then select:
Settings -> My devices -> Add device -> Heating -> Hydraulic -> Tybox 1137 (RF6000 +)
After associating with the Tydom app, the Tybox automatically activates programming via Tydom (menu 1-10 = 1),
and removes access to menus 1-02, 1-03, 1-08, 2-05 and 2-06.
You can activate pre-heat on the Tydom app if you want to use it (see § Pre-heat function).
IMPORTANT:
For the Tydom time programming to work, the Tybox must be set to the "AUTO" position.
For more information, refer to the section § "Operation in connected mode".

7. Association with a door/window magnetic contact

Linking with a door/window magnetic contact means the heating is switched to Frost Protection if a window is
opened (for more than 10 seconds).
1
> 3s
... ... ...
❶ Press the receiver button for 3
seconds until the red LED flashes.

8. Association with a phone transmitter

1
> 3s
... ... ...
❶ Press the receiver button for 3
seconds until the red LED flashes.
Refer to the transmitter manual for a description of controlling the heating using the phone.
No
Yes
2
❷ Briefly press the detector button.
2
❷ From the transmitter's main
menu, tap #400, then tap 1:
the transmitter announces
"Configuration in progress..." and
indicates the number of connected
receivers.
Once the reset is applied, the 2-17 menu
automatically switches back to 0.
OFF
3
❸ Make sure that the receiver LED
has stopped flashing.
OFF
3
❸ Make sure that the receiver LED
has stopped flashing.
9