DELTA DORE DELTA 8000 TA BUS Installation Instructions Manual page 6

3/ CONFIGURING THE ROOM
THERMOSTAT
Correction of the measured
temperature
Temperature displayed in normal mode
Ban on the Cool regulation on the
thermal zones of the Room Temperature
(1)
(if SW2 = ON)
Display the status (ON) of the
associated output
Thermostat type
(2)
(1) CF03 only appears in Heat/Cool production mode
(SW2=ON, refer to the technical unit manual) and
for underfloor heating (CF21 =0) or for ceiling/
ductable (CF21 = 2).
CF05: the Master thermostat enables the
(2)
centralised use of ON/OFF and HEAT/COOL (at
least one Master thermostat is required in an
installation without a programmer).
10
+/- 5°C in 0.1°C increments (0°C by default)
0 Setting display (default selection)
1 Display of the measured temperature.
0 No ban (default selection)
1 Ban
0 No (default selection)
1 Yes
0 Zone thermostat (default selection)
1 Master thermostat
EN
11