Agilent Technologies 1290 Infinity User Manual page 65

Context Menu
The context menu of the dashboard panel contains the following commands:
1290 Infinity Quaternary Pump User Manual
Setting up the Pump with the Instrument Control Interface
Control
Method
Set Error Method
Identify Device
Switch Pump On/Off
Bottle Fillings
Purge On/Off
Prime On/Off
Conditioning On/Off
Flush Filter On/Off
Displays the pump's Control dialog box.
Displays the pump's Method Setup dialog box.
Sets the method that is loaded if an error occurs to the
method that is currently available in the hardware.
Causes the LED on the front of the module to blink for a few
seconds.
Toggles the status of the pump, on or off.
Displays the Bottle Fillings dialog box.
Allows you to control the purging of the system.
Allows you to prime the pump heads for initially drawing
solvent.
Allows you to switch pump conditioning on and off. The
conditioning function is useful for removing small air bubbles
inside the pump flow path.
Allows you to flush a clogged inline filter, which is connected
to the Multi Purpose Valve, see
page 17. Use the pump self-test for checking the filter back
pressure. Do not use this option if no filter is installed!
Using the Module
"Filter Flush Mode" on
4
65