Table of Contents
Advertisement
The USB 3.1 Micro-B receptacle accepts a USB 2.0 Micro-B plug and, therefore, the camera is backward compatible with
the USB 2.0 interface.
Related Knowledge Base Articles
USB 3.1 Frequently Asked Questions
6.4
Interface Cables
To purchase a recommended cable from FLIR, visit the
For USB3 cameras—The USB3 standard does not specify a maximum cable length. FLIR sells a number of cable options.
Visit the
Product Accessories
Related Knowledge Base Articles
Extending the Working Distance of USB3 Cameras
6/27/2019
©2015-2019 FLIR
Integrated Imaging
Solutions Inc.
All rights reserved.
USB 3.1 Micro-B Connector Pin Assignments
Pin
Signal Name
1
VBUS
2
D-
3
D+
4
ID
5
GND
6
MicB_SSTX-
7
MicB_SSTX+
8
GND_DRAIN
9
MicB_SSRX-
10
MicB_SSRX+
Note: When the camera is connected to a USB 2.0 interface, it runs
at USB 2.0 speed, and maximum frame rates are adjusted
accordingly based on current imaging parameters.
page for more information.
Note: A 5-meter USB3 cable (or longer) is not recommended for
laptops or on board controllers.
Description
Power
USB 2.0 differential pair
OTG identification
Ground for power return
SuperSpeed transmitter differential pair
Ground for SuperSpeed signal return
SuperSpeed receiver differential pair
Products Accessories
page.
®
FLIR Firefly
Installation Guide
6 Firefly Physical Interface
13
Advertisement
Table of Contents
