Table of Contents
Advertisement
Starting the Configuration Program
In order to use the PCS software, the transmitter, receivers, and computer running the
PCS software must all be on the same network and must have the same subnet mask and
gateway IP address (see
1.
To start the PCS configuration program, do either of the following:
Double-click on the EAF.exe file, by default located on your computer at
•
c:\Program Files
Click
•
Configuration Software
2.
The first time you open the PCS software, a
screen, click
connected to the network.
3.
Check the software version and ensure that it is 3.3 or higher. To view the software
version:
a.
Click the menu icon in the upper-right corner of the PCS screen and select
Extron PCS
The following screen appears:
Figure 24.
b.
After ensuring that the software version is 3.3 or higher (see figure 24,
to close the window.
Setting Up Network Operation
[or
Program Files(x86)]\Extron\Extron PCS.
>
>
Start
All Programs
Extron Electronics
/
Extron Product Configuration Software
. The Extron PCS window opens, displaying a list of all devices
I Get It
from the drop-down menu.
Software Version Number on the About PCS Screen
USB Extender Plus Series • Remote Configuration and Control
on the previous page).
>
Extron Product
screen appears. To close this
Tutorial
.
About
), click
1
OK
30
Advertisement
Table of Contents
