Mounting The Usb Extender Plus Series; Mounting Usb Extender Plus Standard And Hid Only - Extron electronics USB Extender Plus Series User Manual

Twisted pair extenders for usb peripherals
Hide thumbs Also See for USB Extender Plus Series:
Table of Contents

Advertisement

Mounting the USB Extender Plus Series

Mounting USB Extender Plus Standard and HID Only

The 6 inches (15 cm) deep, 1 inch (2.5 cm) high, quarter-rack wide USB Extender Plus
transmitter and receiver can be placed on a tabletop, mounted on a rack shelf, or mounted
under a desk or tabletop. See the installation instructions provided with the individual
mounting kits.
Tabletop Placement
Affix the four included rubber feet to the bottom of the unit and place it in any convenient
location.
Rack Mounting Safety Guidelines
The following Underwriters Laboratories (UL) guidelines pertain to the safe installation of
these products in a rack:
1.
2.
3.
4.
5.
To find an appropriate rack mounting kit for your installation, go to the product page at
www.extron.com.
Furniture Mounting
The USB Extender Plus can be mounted to a desk, podium, or other furniture as follows:
Elevated operating ambient temperature — If the unit is installed in a closed or
multi-unit rack assembly, the operating ambient temperature of the rack environment
may be greater than room ambient temperature. Therefore, install the equipment in
an environment compatible with the maximum ambient temperature (Tma: +122 °F,
+50 °C) specified by Extron.
Reduced air flow — Install the equipment in the rack so that the equipment gets
adequate air flow for safe operation.
Mechanical loading — Mount the equipment in the rack so that uneven mechanical
loading does not create a hazardous condition.
Circuit overloading — Connect the equipment to the supply circuit and consider the
effect that circuit overloading might have on overcurrent protection and supply wiring.
Consider the equipment nameplate ratings when addressing this concern.
Reliable earthing (grounding) — Maintain reliable grounding of rack-mounted
equipment. Pay particular attention to supply connections other than direct
connections to the branch circuit (such as the use of power strips).
Under furniture — The unit can be mounted under a horizontal surface using an
optional Under-Desk Mount Kit for eighth-rack and quarter-rack width products (see
www.extron.com).
Through furniture — The transmitter or receiver can be mounted through a desk or
other furniture using an optional Extron Through-Desk Mounting Kit for quarter-rack or
half-rack width products (see www.extron.com).
USB Extender Plus Series • Reference Information
38

Advertisement

Table of Contents
loading

Table of Contents