Reference Information; Twisted Pair Cable Termination - Extron electronics USB Extender Plus Series User Manual

Reference
Information
This section provides information on the following subjects:
•
•

Twisted Pair Cable Termination

NOTES:
Figure 34 shows the recommended termination of TP cables with RJ-45 connectors.
1 2 3 4 5 6 7 8
Insert Twisted
Figure 34.
NOTE: Do not use Extron UTP23SF-4 Enhanced Skew-Free AV UTP cable to link the
Twisted Pair Cable Termination
Mounting the USB Extender Plus Series
• RJ-45 termination with CAT 5, CAT 5e, CAT 6, CAT 6e, and CAT 7 cable
must comply with the TIA/EIA T568A or TIA/EIA T568B wiring standard for all
connections.
•
The transmitter and receiver pair work with unshielded twisted pair (UTP) or
shielded twisted pair (STP) cables; but to ensure FCC Class A and CE compliance,
STP cables are required.
• Terminate both ends of the cable identically, in accordance with either the
TIA/EIA T 568A or the TIA/EIA T 568B wiring standard.
RJ-45
Pins:
Connector
Pin TIA/EIA-T568A
1 White-green
2 Green
3 White-orange
4
Blue
5 White-blue
6 Orange
7
White-brown
8 Brown
Pair Wires
TP Cable Termination
transmitter and receiver. Skew-free AV cable is designed for Extron TP transmitter and
receiver AV applications. The USB Extender Series does not work properly with this
cable.
TIA/EIA-T568B
White-orange
Orange
White-green
Blue
White-blue
Green
White-brown
Brown
USB Extender Plus Series • Reference Information
37