Extron electronics USB Extender Plus Series User Manual page 36

3. On the PCS page, click the
Figure 22. Download Button on the PCS Web Page
4. On the
Download Center
the
Download pcss_vnxn.exe
5. If the
File Download - Security Warning
downloading the installer file.
NOTE: If you want to save the installation file to your computer hard drive to run
later, click . On the
Save
desired location. When you are ready to install the software, double-click on the
pcss_vnxnxn.exe
this procedure at step 6.
If, instead, you see a
Download
displays the name
pcss_vnxnxn.exe
6. On the next prompt window that opens, click
7. Follow the instructions on the InstallShield Wizard screens to complete the software
program installation. By default, the installation creates a folder called "Extron PCS" at:
c:\Program Files (x86)\Extron\Extron PCS
c:\Program Files\Extron\Extron PCS
If there is not already an Extron folder in your Program Files folder, the installation
program creates it as well.
USB Extender Plus Series • Remote Configuration and Control
button in the table (see figure 22,
Download
screen that opens, fill in the required information, then click
button.
window appears, click
window that opens, save the setup file to the
Save As
icon, click on the download screen that opens, and restart
Run
icon at the bottom of the page, wait until the icon
, then click it.
to start the installation process.
Run
or
).
1
to begin
Run
28