Symbol Definitions - Extron electronics USB Extender Plus Series User Manual

Symbol Definitions

] = CR/LF (carriage return and line feed) (hex
} = Soft carriage return (no line feed)
• = Space
E = Escape key (hex
X! = On and off (enable and disable)
X@
= Extender unit part number:
X#
= IP address (Default is
X$ = Subnet mask (Default is
X% = Gateway IP address (Default is
X^ = Port number for Config port (Default is
NOTE:
)
1B
= Off or disabled
0
= On or enabled
1
Transmitter:
60-1471-12
Receiver:
60-1471-13
HID Only Transmitter:
60-1539-12
HID Only Receiver:
60-1539-13
AAP Transmitter, black:
60-1472-12
AAP Transmitter, white:
60-1472-13
AAP Receiver, black:
60-1472-22
AAP Receiver, white:
60-1472-23
Decorator-style Transmitter:
Decorator-style Receiver:
60-1473-23
192.168.254.254
255.255.0.0
Unless otherwise indicated, commands are not case-sensitive.
USB Extender Plus Series • Remote Configuration and Control
)
0D 0A
60-1473-13
.)
.)
.)
0.0.0.0
.)
6137
24