Assembly - LOGICDATA SILVERstandard Owner's Manual

ASSEMBLY

04
TOOLS AND EQUIPMENT
The LOGICDATA SILVERstandard should be assembled by two adults. If you assemble the Bed
Frame alone, be careful when lifting heavy parts. No extra tools are needed. Ensure the assembly
area is larger than the Bed Frame. Follow the steps carefully to assemble the Bed Frame correctly.
UNPACKAGING
Lay both boxes flat on the ground, ensuring they are the right way up (see notices on the packag-
ing). Carefully open both boxes and check their contents, as described in Chapter 3, "Box Contents".
NOTICE
Do not use a knife or a sharp object to unpackage the Bed Frame. This may damage the product.
NOTICE
Ensure all parts are at room temperature. Parts that are too cold or hot may cause problems
during assembly.
CAUTION
Risk of minor or moderate injury through cutting
Contact with sharp edges may lead to minor or moderate injury through cutting.
• Avoid contact with sharp edges
CAUTION
Risk of minor or moderate injury through crushing
Gripping the Side Rails by their moving parts when lifting or moving the Bed Frame may lead
to minor or moderate injury through crushing.
• Do not touch moving parts when lifting or moving the Bed Frame
• Only grip the fixed part of the Bed Frame
WARNING
Moderate risk of death or serious injury to children and animals
The plastic packaging of the Bed Frame is a potential suffocation hazard. Leaving children or
animals unsupervised with the empty packaging may lead to death through suffocation.
• Do not leave children or animals unsupervised
• Dispose of unnecessary packaging immediately. Do not dispose of the Assembly Supports
16 // SILVER SERIES OWNER'S MANUAL