LOGICDATA SILVERstandard Owner's Manual page 30

FUNCTIONS
Your Remote Control allows you to move all parts of the Bed Frame from a distance of 23 feet
(7 m). All Remote Controls can perform standard functions, while advanced functions are
only available using certain Remote Controls. Two Remote Controls can be connected to a Bed
Frame at one time.
MOVING THE BED FRAME UP AND DOWN
You can use the UP and DOWN Buttons to move the Head and Foot Platforms up and down:
NOTICE
The Bed Frame will continue to move until the Button is released or the highest / lowest possi-
ble position has been reached.
SAVING A MEMORY POSITION
The LOGICDATA SILVERstandard comes with two saved Memory Positions: Anti-Snore (Position
1) and Zero Gravity (Position 2). You can move to these positions by pressing the Memory Posi-
tion Buttons on your Remote Control.
1. Anti-Snore Position
2. Zero Gravity Position
30 // SILVER SERIES OWNER'S MANUAL
1. Press and hold the UP or DOWN Button for the Platform you wish to adjust
2. Wait until the Bed Frame has reached the desired position
3. Release the UP or DOWN Button