LOGICDATA SILVERstandard Owner's Manual page 33

WIRELESS SYNC MODE
The LOGICDATA SILVERstandard's Wireless Sync Mode allows you to control two Twin XL Bed
Frames with one Remote Control.
Remote Control 1
ACTIVATING WIRELESS SYNC MODE
Before you activate Wireless Sync Mode, please ensure:
▪ Both Twin XL Bed Frames are standing next to each other
▪ The Bed Frames will not collide with each other when moving
▪ Each Bed Frame can be controlled using its own Remote Control
To activate Wireless Sync:
1. Press the Wireless Sync Button on both Remote Controls (on the left side of the Remote Con-
trol) simultaneously for 3 seconds
2. Ensure that the Wireless Sync Indicator on both Remote Controls blinks for 5 seconds. When
the blinking stops, the two Bed Frames have been paired
▪ If the Bed Frames still do not move together, repeat the procedure and make sure that the
Sync Indicator on both Remote Controls is blinking.
▪ If only one Remote Control can operate both Bed Frames, deactivate Wireless Sync Mode (see
"Deactivating Wireless Sync Mode"). Then repeat steps 1 and 2.
3
sec.
Remote Control 1
Bed 1
3
sec.
Bed 2
Remote Control 2
Remote Control 2
SILVER SERIES OWNER'S MANUAL // 33