LOGICDATA SILVERstandard Owner's Manual page 25

LEVELING THE BED FRAME
NOTICE
Use a spirit level to check whether your Bed Frame is horizontal.
NOTICE
If the Bed Frame is too close to the wall (or touching it), it may collide during movement. To avoid
damage to the Bed Frame and the wall, ensure a small distance is kept.
INSERTING THE BATTERIES
NOTICE
Do not use rechargeable batteries.
NOTICE
Remember to replace the batteries in the Remote Control once a year.
If the Bed Frame is on an un-
even surface, you can level it
by adjusting the legs individ-
ually.
To adjust the height of a leg,
turn the lowest part of the
leg until the desired height is
reached.
Insert two 1,5V AAA batteries into the Re-
mote Control and slide the cover in position.
The batteries are provided for you.
SILVER SERIES OWNER'S MANUAL // 25