LOGICDATA SILVERstandard Owner's Manual page 26

PAIRING THE REMOTE CONTROL
In order to operate the Bed Frame, you must pair it to a Remote Control. First, ensure the Bed
Frame has been unplugged for at least 10 seconds, then proceed as follows:
1. Plug the Bed Frame into the mains. This will automatically switch it to Pairing Mode for 30
seconds. In this time, the Bed Frame will search for Remote Controls to be paired with.
2. While the Bed Frame is in Pairing Mode, press any Button on the Remote Control. This will
automatically pair the Remote Control to the Bed Frame.
CAUTION
Risk of minor or moderate injury
It is possible that more than one Bed Frame will be within range of your Remote Control. Oper-
ating the wrong Bed Frame may lead to minor or moderate injury through crushing.
• Ensure the Remote Control is paired to the correct Bed Frame
• Ensure the Remote Control has been safely unpaired before using it on another Bed Frame
UNPAIRING THE REMOTE CONTROL
If you wish to unpair the Remote Control, proceed as follows:
1. Press and hold the Head Platform UP and Foot Platform UP Buttons simultaneously for
at least 15 seconds.
2. Test the Remote Control to check that it has been safely unpaired.
USING THE APP
The SILVERmotion App is an alternative to the Remote Control. With the App, you can:
SILVERmotion is available from the App Store (iOS) and the Google Play store (Android). Scan
the QR Code to go there now.
26 // SILVER SERIES OWNER'S MANUAL
▪ Operate the Bed Frame using your smart device
▪ Access to additional pre-set Memory Positions
▪ Control the Massage Function and set the Massage Timer
(on selected models)
▪ Directly access Customer Support and the Assembly Video