LOGICDATA SILVERstandard Owner's Manual page 34

NOTICE
If both Remote Controls are paired to the same Bed Frame, unplug the Power Converter of the
unpaired Bed Frame until the LED on the Power Converter goes out. Then, plug the Power Con-
verter back in. Press any Button on the Remote Control you want to pair to the unpaired Bed
Frame to complete the pairing (see the section "Pairing the Remote Control" on page 26.
MOVING THE BED FRAME UP AND DOWN IN WIRELESS SNYC MODE
When Wireless Sync Mode is activated, pressing the UP and DOWN Buttons on either of the
Remote Controls will move both Bed Frames simultaneously. The Massage and Underbed Light
functions can also be controlled from a single Remote Control.
DEACTIVATING WIRELESS SYNC MODE
You only require one Remote Control to deactivate Wireless Sync Mode:
1. Press and hold the Wireless Sync Button on one of the Remote Controls for 3 seconds
2. The Sync Indicator will blink for five seconds
3. When the blinking stops, the Bed Frames will be in Single Mode. If either Remote Control
still operates both Bed Frames, repeat the procedure.
3
sec.
34 // SILVER SERIES OWNER'S MANUAL
Remote Control 1 or 2