Introduction - LOGICDATA SILVERstandard Owner's Manual

INTRODUCTION

02
PREFACE
Dear Customer,
Thank you for choosing a product from LOGICDATA.
With the LOGICDATA SILVERstandard, you can be sure that every effort has been made to en-
sure your comfort and safety. The Bed Frame has been rigorously tested and complies with all
relevant safety standards and their requirements.
However, incorrect installation of the product, or usage outside of the intended use described in
this Owner's Manual may lead to hazardous situations. In Chapter 1, "Safety", and throughout
this Owner's Manual, potential risks, their consequences, and steps to avoid harm are explained.
These are clearly labelled as "DANGER", "WARNING", or "CAUTION", depending on their sever-
ity. Read the section "Explanation of symbols and signal words" on page 7 for more details.
This Owner's Manual is intended to enable persons to assemble and operate the Bed Frame safely.
Observing the safety instructions in this Owner's Manual will help you to avoid hazards and min-
imize damage to the system. All persons involved in the assembly of the system must have the
full product documentation available to them at all times. Product documentation consists of
this Owner's Manual and any other relevant documents supplied by the manufacturer. Docu-
mentation must always be kept complete and legible.
LOGICDATA Electronic & Software Entwicklungs GmbH assumes no liability for technical or
printing errors, for deficiencies in this documentation, or for damages caused directly or indi-
rectly by the delivery, performance, or usage of this documentation.
CONTACT INFORMATION
LOGICDATA Electronic & Software Entwicklungs GmbH
Wirtschaftspark 18
8530 Deutschlandsberg
Austria
LOGICDATA North America Inc.
1525 Gezon Parkway SW, Suite C
Grand Rapids, MI 49509
USA
12 // SILVER SERIES OWNER'S MANUAL