LOGICDATA SILVERstandard Owner's Manual page 28

TRANSPORTATION
After it has been fully assembled, the Bed Frame should only be moved short distances within
the same room.
Lifting the Bed Frame requires two people. To lift the Bed Frame, each person must stand at op-
posite ends of the Bed Frame and grip either the Side Rails or the Crossbar (if reachable). If you
cannot reach the Bed Frame, hold the Base Platform. If you intend to lift the bed by the Platforms,
ensure that the Bed Frame has first been moved to the Sleeping Position.
CAUTION
Risk of minor or moderate injury through crushing
Gripping the Side Rails by their moving parts when lifting or moving the Bed Frame may lead
to minor or moderate injury through crushing.
• Do not touch moving parts when lifting or moving the Bed Frame
• Only grip the fixed part of the Bed Frame
CAUTION
Risk of minor or moderate injury through crushing
Tilting the Bed Frame when lifting or moving the LOGICDATA SILVERstandard may lead to mi-
nor or moderate injury through crushing.
• Keep the Bed Frame level while lifting or moving it
• Do not attempt to lift or move the Bed Frame alone
NOTICE
Moving the Bed Frame on its side or upside down may lead to damage to the product.
• Only move the Bed Frame while it is in horizontal position (facing upwards)
• Disassemble the Bed Frame before moving it to a different location
28 // SILVER SERIES OWNER'S MANUAL