Disassembly And Transportation - LOGICDATA SILVERstandard Owner's Manual

DISASSEMBLY AND
TRANSPORTATION
DISASSEMBLY
To disassemble the LOGICDATA SILVERstandard, you must first disconnect the Bed Frame from
the power source. Then, follow the assembly instructions in reverse order.
CAUTION
Risk of minor or moderate injury through crushing
Gripping the Side Rails by their moving parts when lifting or moving the Bed Frame may lead
to minor or moderate injury through crushing.
• Do not touch moving parts when lifting or moving the Bed Frame
• Only grip the fixed part of the Bed Frame
NOTICE
If the Side-to-Side Cable is unplugged, you must perform a Flat Position Reset when it is recon-
nected. To do this, press the Sleeping Position Button for at least 15 seconds.
1. The Remote Control displays "F" to confirm the input.
2. Press and hold the Sleeping Position Button again to move the bed to the flat position
3. The Reset is complete
To minimize the risk of pinch-
ing when transporting the Side
Rails, secure all moving parts
by wrapping packaging tape
around the shown areas.
SILVER SERIES OWNER'S MANUAL //
05
27