Related Manuals for LOGICDATA COSMO SYDNEY
Summary of Contents for LOGICDATA COSMO SYDNEY
- Page 1 COSMO SYDNEY ADJUSTABLE BED FRAME ORIGINAL INSTRUCTIONS Document Version 8 | February 2024...
-
Page 2: Table Of Contents
No part of this manual may be reproduced mechanically, electronically, or by other means, in any form, without prior written permission of LOGICDATA Electronic & Software Entwicklungs GmbH. Violations involving copyright may result in legal action. -
Page 3: Safety
Bed Frames. The Bed Frame must not be used without a mattress, or with water-based mattresses. The Bed Frame may only be assembled and used by adults. It is not designed for children or animals. COSMO SYDNEY ADJUSTABLE BED FRAME – ORIGINAL INSTRUCTIONS // 03... -
Page 4: Reasonably Foreseeable Misuse
Usage outside of the intended use described in these Original Instructions is only allowed with written consent by LOGICDATA. Improper operation or usage outside of the intended use can result in personal injury and damage to the system. Liability and warranty claims are void in cases of usage outside of the intended use. - Page 5 The signal word NOTICE indicates a situation that will not lead to personal injury, but could lead to damage to the product or the environment. RELEVANT SYMBOLS Read all instructions Indoor Use Only CE Labelling Compliance with radio Double isolation regulations COSMO SYDNEY ADJUSTABLE BED FRAME – ORIGINAL INSTRUCTIONS // 05...
-
Page 6: Residual Risks
▪ Do not apply the maximum load to the Foot or Head Platforms . ▪ Do not sit on the mattress while the Bed Frame is in motion. Distribute your weight evenly. 06 // COSMO SYDNEY ADJUSTABLE BED FRAME – ORIGINAL INSTRUCTIONS... - Page 7 ▪ Activate the Child Lock when children are present. ▪ Keep children away from moving Platforms. ▪ Do not allow children to play with the Bed Frame. SAVE THESE INSTRUCTIONS COSMO SYDNEY ADJUSTABLE BED FRAME – ORIGINAL INSTRUCTIONS // 07...
-
Page 8: Introduction
▪ Unauthorized changes to the operating parameters ▪ Disasters, external influence, and force majeure LOGICDATA assumes no liability for technical or printing errors, for deficiencies in this documentation, or for damages caused directly or indirectly by the delivery, performance, or usage of this documentation. - Page 9 A double-insulated product is marked with the words "DOUBLE INSULATION" or "DOUBLE INSULATED." The symbol (square within a square) is also able to be marked on the product. COSMO SYDNEY ADJUSTABLE BED FRAME – ORIGINAL INSTRUCTIONS // 09...
-
Page 10: Box Contents
Upon opening the packaging, use this checklist to ensure all the parts are present and in perfect condition. If any part is damaged or missing, contact LOGICDATA. You can find the relevant contact details at the beginning of the Original Instructions. Ensure that the box is stored in a flat position in a dry place at room temperature. - Page 11 INNER BASE PLATFORM 2X AAA BATTERIES (CONTROL BOX PRE MOUNTED) BASE INNER PLATFORM QUICK START GUIDE INNER ORIGINAL INSTRUCTIONS INNER PLATFORM INNER FOOT PLATFORM FOOT 16X PLATFORM SCREW RETAINER BAR COSMO SYDNEY ADJUSTABLE BED FRAME – ORIGINAL INSTRUCTIONS // 11...
-
Page 12: Assembly
Contact with sharp edges may lead to minor or moderate injury through cutting. ▪ Avoid contact with sharp edges. ▪ Do not connect the product to power supply during assembly. 12 // COSMO SYDNEY ADJUSTABLE BED FRAME – ORIGINAL INSTRUCTIONS... - Page 13 2. Turn the Leg to screw it into the Side Rail. It should be hand tight. 3. Repeat Steps 1 and 2 to Screw in the other 3 Legs. COSMO SYDNEY ADJUSTABLE BED FRAME – ORIGINAL INSTRUCTIONS // 13...
- Page 14 Gripping the Side Rails' moving parts may lead to minor or moderate injury through crushing. ▪ Do not touch moving parts when lifting or moving the Side Rails. Only grip the fixed parts. 14 // COSMO SYDNEY ADJUSTABLE BED FRAME – ORIGINAL INSTRUCTIONS...
- Page 15 1. Lay the Base Platform (G) upside down across the Bed Frame. The Net should face upwards. 2. Lay the Control Box (L) inside the Net on the Base Platform. COSMO SYDNEY ADJUSTABLE BED FRAME – ORIGINAL INSTRUCTIONS // 15...
-
Page 16: Step 5: Connecting The Cables
Plug matches the color of the Plug Port. 2. Insert the Power Converter Cable (K) into the Control Box. Lay the Cable flat along the floor to reduce the risk of tripping. 16 // COSMO SYDNEY ADJUSTABLE BED FRAME – ORIGINAL INSTRUCTIONS... - Page 17 Bar should be inside the Brackets at the end of the Foot Platform (F). 2. Press the Retainer Bar (N) firmly towards the Bed Frame to click it into place. COSMO SYDNEY ADJUSTABLE BED FRAME – ORIGINAL INSTRUCTIONS // 17...
- Page 18 Remote Control and slide the cover into position. The batteries are provided for you. NOTICE Replace the batteries in the Remote Control once a year. Do not use rechargeable batteries. 18 // COSMO SYDNEY ADJUSTABLE BED FRAME – ORIGINAL INSTRUCTIONS...
-
Page 19: Operation
▪ Ensure the Remote Control is paired to the correct Bed Frame. ▪ Ensure the Remote Control has been safely unpaired before using it on another Bed Frame. COSMO SYDNEY ADJUSTABLE BED FRAME – ORIGINAL INSTRUCTIONS // 19... -
Page 20: Pairing The Remote Control
3. Release the UP/DOWN Button. 4. Quickly press the button twice and hold the second press of the button until the control box clicks twice to confirm. 5. Release the Memory Position Button. 20 // COSMO SYDNEY ADJUSTABLE BED FRAME – ORIGINAL INSTRUCTIONS... -
Page 21: Factory Reset
If you remove the batteries from the Remote Control, the Child Lock will be deactivated automatically If you try to operate the Bed Frame while the Child Lock is activated, the LED will flash 6 times. COSMO SYDNEY ADJUSTABLE BED FRAME – ORIGINAL INSTRUCTIONS // 21... -
Page 22: Sync Mode
1. Press (in Europe: Press and Hold) the Sleeping Position Button on one Remote Control. 2. Wait for both Bed Frames to reach their lowest position. 3. The Bed Frames are realigned. Continue using the Bed Frame as normal. 22 // COSMO SYDNEY ADJUSTABLE BED FRAME – ORIGINAL INSTRUCTIONS... -
Page 23: Disassembly And Transportation
Moving the Bed Frame on its side or upside down may lead to damage to the product. ▪ Only move the Bed Frame while it is in horizontal position (Platforms facing upwards). ▪ Disassemble the Bed Frame before moving it to a different location. COSMO SYDNEY ADJUSTABLE BED FRAME – ORIGINAL INSTRUCTIONS // 23... -
Page 24: Cleaning And Maintenance
MAINTENANCE The Adjustable Bed Frame does not require maintenance. If the Bed Frame becomes damaged, or if you are experiencing technical difficulties, contact LOGICDATA using the details on page 2. 24 // COSMO SYDNEY ADJUSTABLE BED FRAME – ORIGINAL INSTRUCTIONS... -
Page 25: Troubleshooting
1. Check the cables between control unit and side rails. Uneven side rails 1. Check if anything is blocking the movement of the Bed Frame. 2. Perform a Flat Position Reset. Follow the instructions in the previous chapters. COSMO SYDNEY ADJUSTABLE BED FRAME – ORIGINAL INSTRUCTIONS // 25... -
Page 26: Click Codes
Normal operation. Continue to operate the Bed Frame. 1 X Click The system is working in emergency operation mode. Contact Customer support. 4-6 X Click An internal error has occured. Contact customer support. 26 // COSMO SYDNEY ADJUSTABLE BED FRAME – ORIGINAL INSTRUCTIONS... -
Page 27: Technical Data
NOTICE The permitted maximum load is dependent on input voltage. At the lower end of the input voltage range, maximum load may be reduced. Contact LOGICDATA for additional technical data info. * For use in prefabricated bed frame COSMO SYDNEY ADJUSTABLE BED FRAME – ORIGINAL INSTRUCTIONS // 27... -
Page 28: Final Disposal
Dispose of all materials and parts according to local guidelines and regulations. Ensure that the disposal is lastingly compatible for humans and nature. 28 // COSMO SYDNEY ADJUSTABLE BED FRAME – ORIGINAL INSTRUCTIONS...
Need help?
Do you have a question about the COSMO SYDNEY and is the answer not in the manual?
Questions and answers