LOGICDATA SILVERstandard Owner's Manual page 32

CAUTION
Risk of minor or moderate injury to children
Misuse of the Bed Frame by children could lead to minor or moderate injury.
• Activate the Child Lock when children are present
• Do not allow children to play with the Bed Frame
OPERATING THE UNDERBED LIGHT
OPERATING THE MASSAGE FUNCTION*
Certain versions of the Bed Frame (SILVERstandard+) are equipped with a Massage Function. To
begin using this function, proceed as follows:
NOTICE
The Massage Motor has a Duty Cycle of 45 minutes. After this, it will shut down for 15 minutes.
MASSAGE SETTINGS*
There are three different Massage Settings to choose from. These are as follows:
▪ Constant
*Only with SILVERstandard+
32 // SILVER SERIES OWNER'S MANUAL
The LOGICDATA SILVERstandard is equipped with an Underbed Light. To turn
the Light on or off, press the Underbed Light Button on the right-hand edge of
the Remote Control.
1. Press any of the Massage Buttons on your Remote Control
2. Use the Massage Intensity Button to set the desired Massage Intensity. There
are five levels of Intensity. The Massage Function always begins at level three
3. To stop the Massage, press the Massage Off Button on the Remote Control
▪ Wave ▪ Pulse