LOGICDATA SILVERstandard Owner's Manual page 19

D
CAUTION
Risk of minor or moderate injury
Lifting the Bed Frame incorrectly could cause you to lose balance or drop the Bed Frame. This
may lead to minor or moderate injury.
• Lift the Bed Frame by gripping the center of the Crossbar
• Do not lift the Bed Frame higher than required to place the Supports under the Crossbar
MOUNTING THE CORNER COVERS
E F
4x
D
1. Remove the assembly supports
and place the end of the Bed Frame
with legs attached on the floor.
2. Lift up the other end and place the
Assembly Supports underneath
the Crossbar.
Screw in the remaining legs (D).
3.
4. Remove the assembly supports.
Place the Corner Covers (E, F) in
1.
their position over each corner.
2. Press firmly towards the frame
to click them into place.
SILVER SERIES OWNER'S MANUAL // 19