DECLARATION OF CONFORMITY
Application of Council Directive:
Manufacturer's Address:
Equipment Type/Environment:
Trade Name/Model No:
Standards to which Conformity is Declared:
Standard
EN61000-4-2:
Electrostatic Discharge
2009
EN61000-4-3:
Radiated RF Immunity
2010
EN61000-4-4:
Electrical Fast Transient on Mains
2010
and I/O
EN61000-4-5:
Surge on AC Lines
2005
EN61000-4-6:
Conducted RF on AC Mains and
2008
I/O
EN61000-4-11:
Voltage Dips/Short Interruptions
2004
EN61000-3-2:
AC Harmonic, Flicker
2009,3-3: 2008
CISPR11/
RF Emissions Radiated, below 1
EN 55011: 2009
GHz and Conducted, AC Mains
I, the undersigned, hereby declare that the design of the equipment specified above conforms to the above Directive(s) and Standards
as of February 13, 2015.
Edward J Carter
Director of Engineering
Teledyne Isco
4700 Superior Street
Lincoln, Nebraska 68504
Phone: (402) 464-0231
Fax: (402) 464-0318
60-1262-111
Rev B
2004/108/EEC
2006/95/EEC
2012/19/EU
Manufacturer's Name:
Teledyne Isco
4700 Superior, Lincoln, Nebraska 68504 USA
Mailing Address: P.O. Box 82531, Lincoln, NE 68501
Laboratory Equipment for Light Industrial/Commercial Environments
Syringe Pumps: 30D, 65D, 65DX, 65DM, 65DXX, 65HP, 100DM, 100DX,
100DX2, 100DX4, 260D, 260HP, 260SP, 260DX, 260DXX, 500D, 500DO,
500HV, 500SP, 500DX, 500DXX, 500HP, 500HPX, 1000D, 1000DO,
1000HV, 1000DX 1000DXX
Year of Issue:
2015
EN 61326-1:2006 EMC Requirements for Electrical Equipment for
EN 61010-1: 2010 Safety Requirements for Electrical Equipment for
Description
The EMC Directive
The Low Voltage Directive
WEEE Directive
Measurement, Control, and Laboratory Use
Measurement, Control, and Laboratory Use
Severity Applied
Level 2 - 4kV contact discharge
Level 3 - 8kV air discharge
80 MHz to 2.7GHz 80% AM at 1kHz
Level 1 - 10 V/m
Level 2 - 2kV on AC lines
2kV common mode, 1KV differential mode
150 kHz to 80 MHz, 3V rms, 80% modulated
0.5 cycle, each polarity 100%
Group 1, Class A Industrial, Scientific, and
Medical Equipment
Performance
Criteria
A
A
A
A
A
A
A
Pass
Pass