Installing The Fittings (260D, 65Dm, And 100Dm/Dx Only); Tubing Adapter For 30D/65D Pumps - Teledyne D series Installation And Operation Manual

D Series Syringe Pumps
Section 2 Fluid System Connections and Accessories
2.2.5 Installing the
Fittings (260D, 65DM,
and 100DM/DX only)
1
Figure 2-2 /

" Tubing adapter for 30D/65D pumps

16
F250 Fitting/Connection
Figure 2-3 30D/65DFitting
2-4
1
/ " Refer to Figure 2-1
16
1. Loosen the
threads.
2. Insert the adapter into the port and finger-tighten the fit-
tings.
3. Retighten the
4. Tighten the
5. Insert the
6. Tighten the
1
/ Ferrule
8"
Note
It is recommended that after tightening, the fittings be removed and
examined.
Refer to Figure 2-3 for components and fittings for the 30D/65D.
Gland nut
Collet grips tubing
here for anti-vibration
support
Line contact sealing
1 
" nut on the adapter until it is held by a few
16
1 
" nut until it is also finger-tight.
16
1 
" nut with a wrench to crimp the ferrule.
8
1 
" tubing through the
16

1
" nut.
16
1
/ Nut
8"
1
/ Ferrule
16"
Collar
1 
" nut until it stops.
16
1
/ Nut
16"
1
/ Tubing
16"
Slotted collet
Valve or
fitting body