Maintenance Kits - Teledyne D series Installation And Operation Manual

9.2 Maintenance Kits

Piston & Wiper Seals-
Replace seals annually, at a minimum. Replace more often for appli-
cations involving heavy use or harsh/abrasive substances.
Cylinder Cap Seal -
Replace when removing/installing cap for servicing, or periodically if
cap is removed more often (e.g., for spooning in highly viscous sub-
stances).
Control Panel Label -
Depending on use, the most frequently pressed keypad buttons may
eventually wear out.
Port Plug
Tubing Connectors
Fuses
Shear Key w/
Installation Tool -
If the pump motor fails to stop in the event of an overpressure situa-
tion, the shear key may require replacement.
Wrench Package -
Various wrenches for use with most common part replacements.
Motor Brush Set - Inspect the motor brushes every two years of operation, or every 6,000 piston strokes,
whichever comes first (inspect the top brush, which is easier to access). Other option: replace entire
motor.
Cable Ties & Mounts, Zero Volume Nut & Ferrule (100D/260D), Universal Sensor Harness
(100D/260D/500D)
Section 9 Pump Maintenance, Troubleshooting, and Servicing
Maintenance kits are available for all pump models, for use in
many maintenance and servicing tasks.
Table 9-1 summarizes major kit components. Table 9-2 contains
part numbers for each kit.
Table 9-1 Maintenance Kit Contents
D Series Syringe Pumps
Cyl. cap
Shear key
Shear key for
65DM
Installation tool
seal
Piston
seal
Wiper
seal
9-3