D Series Syringe Pumps
Section 5 Continuous Flow Introduction, Installation, & Operation
Plumbing connections
5-8
RISK OF INJURY. THE PRESSURE PRODUCED
COULD BE 700 BAR. PLEASE UTILIZE
APPROPRIATE TUBING AND CONNECTIONS
NOTED IN THE MANUAL.
3. Loosely attach the tubing lengths from the valve assembly
to the pumps.
4. Allow the bracket to hang vertically; place the straps
around the pressure transducer caps. Tighten the wing-
nuts.
5. Install the four panhead screws on bottom of the bracket.
6. Tighten the tubing nuts.
7. Connect the inlet tube to the supply reservoir. Connect the
outlet tee to your apparatus.
DANGER