Dahua Network Camera Web 3.0 Operation Manual page 106

Dahua Network Camera Web 3.0 Operation Manual
Step 4
It is to set the parameters of face database, please refer to the following table for more details.
Parameter
Deploy
Similarity
Threshold
More Info
Arm/Disarm
Delete
5.3.5.2.1 Search
Step 1
Click "More Info" on the interface of face database config. The system will display the interface which is
shown in Figure 5-69.
Figure 5-68
Note
Click "Deploy" and the deployment of face database becomes valid.
The comparison succeeds when the matching degree between detected
face and features in the face database reaches the similarity threshold
which has been set, it will display comparison result on the preview
interface after comparison becomes successful.
Click "More Info" to manage face database, it includes search,
registration, modify and so on.
It is to set the alarm period, it can enable alarm event only within the time
range which has been set, please refer to step 3 working period in 5.3.7.1
Heat Map.
It is to delete the selected face database.
Figure 5-69
98