Dahua Network Camera Web 3.0 Operation Manual page 89

Dahua Network Camera Web 3.0 Operation Manual
Parameter
PTZ
Snapshot
Step 5
Click "Save" to complete the setting of motion detection.
5.3.1.2 Video Tampering
Step 1
Select "Setup > Event > Video Detection > Video Tampering" and the system will display the interface of
"Video Tampering" which is shown in
Step 2
Set the parameter of video tampering; please refer to the following sheet for more details.
Parameter
Enable video
tampering
Enable defocus
detection
Function

Here you can set PTZ movement when alarm occurs. Such as go to
preset x when there is an alarm.

The event type includes: preset, tour and pattern.
You need to check the box here so that system can backup motion detection
snapshot file. You shall set snapshot period in Storage>Schedule.
Figure 5-57
Figure 5-57
Function
You need to check the box to enable video mask detection alarm.
You need to check the box to enable defocus detection alarm.
.
81