Dahua Network Camera Web 3.0 Operation Manual page 100

Dahua Network Camera Web 3.0 Operation Manual
Step 4
Click "Draw Target" to draw the size model of filtered target in the video image.
Step 5
It is to set the parameter of abandoned object, please refer to the following sheet for more details.
Parameter
Working Period
Keep time
Record
Record Delay
Relay out
Alarm Delay
Send Email
Snapshot
Step 5
Click "Save" to complete the setup of abandoned object.
5.3.4.4 Missing Object
Missing object means the system will trigger alarm if it exceeds certain amount of time after the target is
taken away from the original scene.
The system can make statistics of the still areas in the foreground area and distinguish if it is missing
object or abandoned object according to the similarity between foreground and background, it will
trigger alarm when it exceeds the time which is set by users.
Function
Note:
It is to set the alarm period, it can enable alarm event only during the period
range which has been set.
1. Click "Setup" and the system will pop out the interface of "Working
Period".
2. It is to set working period according to the following methods:

You can input time numerical value or press the left mouse button to
drag on the setup interface to set.

There are six periods to be set every day, select the check box in front
of the period, and then the period is valid.

Select week number (it selects Sunday by default, if it selects the whole
week, then it means the setup can be applied to the whole week, you
can also select the check box in front of the week number to implement
independent setting for some days).
3. Click "Save" to complete the setup of working period.
It is to set the shortest time from when the object is abandoned to when it
triggers alarm.
Check it and so when alarm occurs, system will auto record.
System can delay the record for specified time after alarm ended.
Enable alarm activation function. You need to select alarm output port so
that system can activate corresponding alarm device when alarm occurs.
System can delay the alarm output for specified time after alarm ended.
If you enabled this function, System can send out email to alert you when
alarm occurs and ends. User can set email address in Network>SMTP.
Select "Snapshot" and the system will auto trigger alarm and snapshot when
alarm occurs.
92