Dahua Network Camera Web 3.0 Operation Manual page 71

Dahua Network Camera Web 3.0 Operation Manual
Parameter Function

SNMP Version


SNMP port The listening port of the proxy program of the device. It is a
UDP port not a TCP port. The value ranges from 1 to 65535.
The default value is 161
Community It is a string, as command between management and proxy, ,
defining a proxy, and a manager's authentication.
Read-only access to all SNMP targets, default is public.
Read community
Note: Only number, letter, _, and – supported.
Read/write access to all SNMP targets, default is private.
Write community
Note: Only number, letter, _, and – supported.
The destination address of the Trap information from the
Trap address
proxy program of the device.
Address where to send Trap message.
Trap Address
Port which send Trap message, default is 162, range
Trap Port
1~65535.
Check SNMP v1, device only process v1 info.
Check SNMP v2, device only process v2 info.
Check SNMP v3, can set username, password and
encryption method. Server calibrate corresponding
username, password and encryption method too access
device and v1/v2 are unavailable.
Figure 5-37
63