Dahua Network Camera Web 3.0 Operation Manual page 60

Dahua Network Camera Web 3.0 Operation Manual
Please refer to the following sheet for detailed information.
Parameter
Host Name
Ethernet Card
Mode
Mac Address
IP Version
IP Address
Preferred DNS
Alternate DNS
Figure 5-26
Function
It is to set current host device name. It max supports 15
characters.
Please select the Ethernet port. Default is wired.
Please note you can modify the default Ethernet card if there is
more than one card.
There are two modes: static mode and the DHCP mode. Select
DHCP mode, it auto searches IP, and you cannot set IP/subnet
mask/gateway. Select static mode, you must manually set
IP/subnet mask/gateway.
It is to display hose Mac address.
It is to select IP version. IPV4 or IPV6.
You can access the IP address of these two versions.
Please use the keyboard to input the corresponding number to
modify the IP address and then set the corresponding subnet
mask and the default gateway.
DNS IP address.
Alternate DNS IP address.
52