Dahua Network Camera Web 3.0 Operation Manual page 84

Dahua Network Camera Web 3.0 Operation Manual
2. Select signed certificate and certificate key path respectively via "Browse", click "Upload".
3. Install root certificate, please refer to step 6~11 for more details.
4. Check "Enable HTTPs", click "Save". The system will display the dialog box of "Need to reboot the
device", and then the config is valid.
5. Use HTTPs
Use HTTPs to log in.
Enter https://xx.xx.xx.xx in the browser, and it will pop out normal login interface; the browser will prompt
certificate error if the certificate is not installed, which is shown in
Figure 5-52
Figure 5-53
Figure 5-54
.
76