Dahua Network Camera Web 3.0 Operation Manual
5.2.8 SNMP
The SNMP interface is shown as in
The SNMP allows the communication between the network management work station software and the
proxy of the managed device. Please install the software such as MG MibBrowser 8.0c software or
establish the SNMP service before you use this function. You need to reboot the device to activate the
new setup.
Please refer to the following sheet for detailed information.
Figure 5-35
Figure 5-36
Figure 5-37
and
Figure 5-36
.
62
Need help?
Do you have a question about the Network Camera Web 3.0 and is the answer not in the manual?
Questions and answers