Initial Config; Device Initialization - Dahua Network Camera Web 3.0 Operation Manual

Dahua Network Camera Web 3.0 Operation Manual

2 Initial Config

In this chapter it is to introduce the device initial config operation, which includes device initialization,
login device, log out WEB interface and password reset.

2.1 Device Initialization

It needs to implement device initialization when you use the device for the first time. Here it is to take
WEB operation as an example to introduce device initialization. You can also initialize device via Quick
Config Tool, NVR and platform etc.
Note
In order to guarantee device safety, please keep admin login password properly after device
initialization, and modify the password regularly.
Step 1
Open IE browser, input camera IP address in the address bar and click Enter.
The system will display the interface of Device Initialization after it is connected successfully, which is
shown in Figure 2-1.
Note
The default IP address is 192.168.1.108.
Figure 2-1
Step 2
It is to set admin login password, please refer to Table 2-1 for more details.
2