Dahua ITC237-PU1B-IR Web Operation Manual
  1. Manuals
  2. Brands
  3. Dahua Manuals
  4. Security Camera
  5. ITC237-PU1B-IR
  6. Web operation manual

Dahua ITC237-PU1B-IR Web Operation Manual

2.0mp cmos hd camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
2.0MP CMOS HD Camera Web Operation Manual
Version 1.0.1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ITC237-PU1B-IR and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Dahua ITC237-PU1B-IR

Summary of Contents for Dahua ITC237-PU1B-IR

  • Page 1 2.0MP CMOS HD Camera Web Operation Manual Version 1.0.1...
  • Page 2 Important Safeguards and Warnings 1．Electrical safety All installation and operation here should conform to your local electrical safety codes. The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited power source is rated 90-240V. We assume no liability or responsibility for all the fires or electrical shock caused by improper handling or installation.
  • Page 3 Before installation, please open the package and check all the components are included. Contact your local retailer ASAP if something is broken in your package. 7. Daily Maintenance Please shut down the device and then unplug the power cable before you begin daily maintenance work. Use the dry soft cloth to clean the device.
  • Page 4 About the Manual  This manual is for reference only. Slight difference may be found in the user interface.  All the designs and software here are subject to change without prior written notice.  All trademarks and registered trademarks mentioned are the properties of their respective owners. ...

  • Page 5: Table Of Contents

    Table of Contents Web ..........................1 First Time Log in ....................1 Non-first Time Login ..................4 System Menu ....................4 Preview .......................... 5 Video Bit Stream Bar ..................5 Preview Window Switch ..................6 Common Function Bar ..................8 Monitor Window Switch ...................
  • Page 6 Storage ......................43 4.5.1 Point ......................43 4.5.2 Local ......................43 4.5.3 FTP ......................44 4.5.4 Client ......................45 4.5.5 Path ......................46 System ......................47 4.6.1 General ..................... 47 4.6.2 Account ..................... 49 4.6.3 Default ...................... 52 4.6.4 Import/Export .................... 53 4.6.5 Auto Maintain ....................

  • Page 7: Web

    1 Web The device supports device access and management via WEB on PC. Note: Interface and settings here are for reference only. 1.1 First Time Log in Open IE and input HD intelligent traffic camera IP address in the address column. For example, if your Figure 1-1 IE IP is 192.168.1.108, then please input http:// 192.168.1.108 in IE address column.
  • Page 8 Figure 1-2 Security Settings After installation, the interface is shown as below. See Figure 1-3. Please input your user name and password. Follow system instructions to change password, and click OK. Default factory name is admin and password is admin. Note: For security reasons, please modify your password after you first log in.
  • Page 9 Figure 1-3 Login Interface After you logged in, HD intelligent traffic camera web homepage is shown as in Figure 1-4. Note: Download and install plug-in if you cannot enter the homepage. Figure 1-4 Web Homepage...

  • Page 10: Non-First Time Login

    1.2 Non-first Time Login Step 1. Open IE and input HD intelligent traffic camera IP address in the address column. Step 2. Please input your user name and password. Click Login. 1.3 System Menu System menu is shown as in Figure 1-5. Figure 1-5 System Menu Function Installation debugging, adjust video and image window, record video and image,...

  • Page 11: Preview

    2 Preview Click Live tab, system will show Live page. Here you can view live video, image, snapshot, record and Figure 2-1 etc. See Figure 2-1 Live There are five sections:  Section 1: Video bit stream bar  Section 2: Preview window switch ...

  • Page 12: Preview Window Switch

    Parameter Function You can use main stream to record video record, network Main stream monitor function under normal network environment. You can set resolution within its supported range. Extra stream It is a substitute for main stream under insufficient band width. Protocol Select video monitoring protocol, currently support TCP only.
  • Page 13 Figure 2-4 Large Window Icon Name Note Original size Original size and best-bit size switch. Click switch to original size. Image adjustment Display image adjustment window. Click to then off image adjustment. Table 2-1 Figure 2-5 Adjusting Window Click on the right. See...

  • Page 14: Common Function Bar

    Figure 2-5 Adjusting Window Note:  All the operations here apply to WEB end only.  Please go to “Setup->Camera->Attributes” to set. Please refer to the following sheet for detailed information. Parameter Function It is to adjust monitor video brightness. Video setup It is to adjust monitor video contrast.
  • Page 15 Table 2-3 Step 1. Set focus zoom mode, used to identify vehicle. See Parameter Note Auto adjust focus  Note: This function is for ITC237-PU1B-IR, ITC237-PU1B-L camera only. Auto Focus Auto adjust lens.  Note: This function is for ITC237-PW1B-IRZ camera.
  • Page 16 - and +: click to add speed, click  directly drag bar to set rear focus. Note: This function is for ITC237-PU1B-IR, ITC237-PU1B-L camera only. Restore All Restore all settings to default.  Resume：When you click Pause. Video pauses, then click Resume to continue playing.

  • Page 17: Monitor Window Switch

    Note: Plate best width range is 140~160. If you want to modify, go to Setup>ITC>Intelligent>Video Analysis>Recognition. Step 5. Set local plate. Step 6. Click Save. 2.4 Monitor Window Switch Figure 2-8 Monitor Window Switch The monitor window switch interface is shown as in Figure 2-8 Monitor Window Switch ...

  • Page 18: Query

    3 Query 3.1 Picture Query 3.1.1 SD Picture Figure 3-1 SD Picture Query Click query button, you can see an interface is shown as in Click Open Local, select picture you want to verify and click Water Verify, then you can view the result. Select the picture, click Open to preview.

  • Page 19: Picture Attribute

    3.1.2 Picture Attribute Select Search>Picture Query>Picture Attribute.  Set download picture attribute time and naming method.  Select download picture by file or by time. Figure 3-2 Parameter Note Create time: when picture is downloaded on PC, picture attribute time is ...

  • Page 20: Record Query

    Figure 3-3 Step 1. Click Open Local, select folder of picture you want to verify. Step 2. Select picture. Step 3. Click Water Verify, see results in list. You can click Open or double click picture to preview. 3.2 Record Query 3.2.1 Record Figure 3-4 Record Click Query>Record Query>Record, you can see an interface is shown as in...

  • Page 21: Water Mark

    Figure 3-4 Record Query Click Open Record, select record path, click Open to view record. Icon Name Note  When it shows , means pause or play record. After you click it switches to normal playing status. play/pause When it shows , means it is playing record.

  • Page 22: Plate Query

    Select Query>Record Query>Water Mark, system shows progress of verifying and normal watermark. Figure 3-5 Figure 3-5 Step 1. Click Open Record, select record file. Step 2. Click Water Verify. When it is complete, the page will show complete. 3.3 Plate Query Select Query>Plate Query>Plate Query, search vehicle pass record.
  • Page 23 Step 2. Click Query, see result in list. Step 3. Click Export and select storage path to export result to PC.

  • Page 24: Configure

    4 Configure 4.1 ITC 4.1.1 Guide Setup Select Setup>ITC>Guide Setup.  Set date, time and format.  Set IP address, subnet mask and default gateway. Figure 4-1 Step 1. Click Setup. Figure 4-2 Step 2. Set camera time, date, click Next. Parameter Note Date Format...

  • Page 25: Snapshot

    Table 4-1 Step 3. Set camera IP address and etc., click Finish. Figure 4-3 Note:  Device initial IP address is 192.169.1.108; initial subnet mask is 255.255.255.0; initial gateway is 192.168.1.1.  Time info can be modified in Setup>System>General>Date&Time. IP address can be modified in Setup>Network>TCP/IP.
  • Page 26 Figure 4-4 Snapshot Please refer to the following sheet for detailed information. Parameter Note Work mode Coil：force to coil snapshot  Manual  Video：force to video snapshot  Mix mode：force to combine coil and video snapshot. ANPR Snap Amount Snapshot 1～2 pic ...

  • Page 27: Intelligence

     Double_in2-snapt_speed Step 4. Click Setup, in mapping box, select relationship of logic coil and physical coil. Click OK. Step 5. Click Save in RS485/IO interface. 4.1.3 Intelligence 4.1.3.1 Video Analysis-Recognition Figure 4-6 The video analyse interface is shown as in Figure 4-6 Recognition ...

  • Page 28: Osd Config

    Figure 4-7 Step 1. Click Browse, select xml file path, click Open. Step 2. Click Import. Step 3. Set file parameter. Parameter Note Confidence filter, set recognition criteria range within 0-100.  The lower the confidence filter, the less the criteria will be, so the easier to recognize plate but miss-alarm rate Confidence Filter will be higher.
  • Page 29 Figure 4-8 Step 2. Select font size and solution. Set OSD font. Step 3. Set channel title and location. a) Select channel title. b) Check Turn on. c) Input channel name. d) Use the mouse to drag the yellow box or change the regional point coordinates, select the channel position title.
  • Page 30 Set snap OSD information and location, OSD options include time, driveways name, week, location, speed, license plate, illegal code and other information.  Figure 4-9 Select Setup>ITC>OST Config>Snap PSD. See Figure 4-9  Select any region in video, and drag mouse to add snapshot title. Move box to place you want to display it, or enter coordinate value in X/Y field on the right.

  • Page 31: Extra Device

    Figure 4-10  Set OSD option. Tips: Click Suggest Overlay to quickly set common overlay mode. Parameter Note Insert Front/Back OSD option to adjust the order selected between. Modify All selected OSD information state by turns , you can modify any OSD options prefix, suffix, and other content, and the number of separators.

  • Page 32: Plate White/Black List

    Figure 4-11 Parameter Note Select work mode, include： Off：NO light off   Always：NO light on Work Mode  Auto：auto enable NO light according to time or brightness. Note: This function is for ITC237-PU1B-L only. Light Brightness Set light brightness, range 0～20. Light Arr Mark On light group, there are 3 groups for selection.
  • Page 33 Figure 4-12 Parameter Note When checked, set the number of matching characters and the minimum matching digits. The system will match the license plate as Enable the white list vehicle without matching each character with the license plate number which already exists in the white list data. The checked characters are matched, and unselected characters will Card Word not be analyzed.
  • Page 34 Figure 4-13 Functions:  Search plate no.  Edit plate info  Delete single plate no.  Batch delete plate no.  Progressively import white list info Steps: Figure 4-14 Step 1. Click Add. See...
  • Page 35 Figure 4-14 Step 2. Enter complete plate character. Step 3. Set start time and end time of its existence in white list. Once exceeding this period, the plate will no longer be in white list. Step 4. Enter vehicle owner name, select whether to authorize barrier right. Step 5.
  • Page 36  View vehicle details.  Import/Export black list vehicle info. Figure 4-15 Please refer to Ch 4.1.6.2. 4.1.6.4 Link Sign Out  Enable link signal output.  Set open barrier mode.  Set alarm output of open barrier and close barrier. Figure 4-16 Parameter Note...

  • Page 37: Intelligence Default

    Click it to manually trigger output open barrier signal. Click it to manually trigger output close barrier signal. Hand Off Note: For ITC237-PU1B-IR, ITC237-PU1B-L only Alarm output: start alarm linkage output port, you can choose any of the  two ports.
  • Page 38 Figure 4-18 General Please refer to the following sheet for log parameter information. Parameter Function The value adjusts brightness of full image. Default value is 50. The higher the value, Brightness the brighter the image. When image is too bright or too dark, you may adjust this value.
  • Page 39 Parameter Function According to the actual demand, choose a different fill light setting mode.  Manual: Set the fill light of the far and near lights manually. Click to add a step, click to reduce a step, the range of 0 ~ 100 optional. ...

  • Page 40: Video

    Parameter Function Shutter mode Select: single shutter. Video Tridim (3D) Check Enable to enable 3D NR. Denoise Scene mode Select device scene mode to adjust video to best effect. Sharpness Sets the sharpness of the picture in this scene. The larger the value, the higher the detail contrast on the image plane and the sharper the image.
  • Page 41 Figure 4-20 Video Please refer to the following sheet for log parameter information. Parameter Function Code-stream Support general type. type Encode mode  It supports H.264B, H.264M, H.264H, H.265, MJPEG. Resolution Display resolution. Frame rate Select fps (FPS) Bit rate type It includes: CBR and VBR.
  • Page 42 Figure 4-21 Snapshot The snapshot interface is shown as in Figure 4-21 Snapshot Please refer to the following sheet for log parameter information. Parameter Function Snapshot It includes general snap and trigger snap. General snap works within type predetermined time period. Trigger snap works at time of motion detect, privacy masking and relay activation.

  • Page 43: Network

    Figure 4-22 Interest Area In the video, drag mouse left key, to set interest area, which is shown as yellow box. Note: You can set up to 3 interest areas at the same time. Please refer to the following sheet for log parameter information. Parameter Function ...
  • Page 44 Figure 4-23 TCP/IP Please refer to the following sheet for log parameter information. Parameter Function Host name Set current host name. Max supports 32 characters. Ethernet card Set Ethernet card to config. You can select from static and DHCP mode. In DHCP mode, it automatically search IP while you cannot set IP/subnet mask/gateway.

  • Page 45: Onvif

    4.3.2 ONVIF ONVIF is Open Network Video Interface Forum, an online video to achieve a framework agreement, which are produced by different vendors of network video products (such as front-end cameras, video equipment, etc.) is fully interoperable. Select Setup>Network>Connection>ONVIF. Check the open ONVIF login, login ONVIF need a username and password verification; turn off the Figure 4-24 feature you do not need validation.

  • Page 46: Event

    Figure 4-26 Figure 4-27 Step 3. Select IP or IP segment, click Save. See Figure 4-27 Step 4. Click Save in Trusted List tab. Step 5. System informs you it has been successfully saved. In Trusted list tab, you can: ...

  • Page 47: Abnormity

    Step 2. Click Trigger to output alarm output signal. Step 3. Click Refresh to search alarm output status. Note: ITC237-PU1B-IR, ITC237-PU1B-L have a total of 2 channels of alarm output; ITC237-PW1B-IRZ only has 1 channel of alarm output. 4.4.2 Abnormity Note: ITC237-PU1B-IR, ITC237-PU1B-L have a total of 2 channels of alarm output;...
  • Page 48 Figure 4-30 SC Space Lack Figure 4-31 SC Error Figure 4-32 Disconnection...

  • Page 49: Storage

    Figure 4-33 Please refer to the following sheet for log parameter information. Parameter Function Enable Check box to enable this function. When alarm occurs, set corresponding relay out. You must enable this Relay-out function first. Relay-out delay Alarm will continue for X seconds after motion detect ends. You can set X within 10 s～300 s.

  • Page 50: Ftp

    Figure 4-35 Local 4.5.3 FTP Note:  When you select FTP as storage method, FTP is enabled.  Set picture name and path, click Help to view naming rule.

  • Page 51: Client

    Figure 4-36 FTP Parameter Note When the network is disconnected or failed, you can save the image to the Offline Transfer local memory card, to be automatically restored after the network upload to the FTP server or platform. Enable Enable the FTP server storage point. Server IP The IP address of the FTP server.

  • Page 52: Path

    Figure 4-37 Client It supports upload by IP address or MAC address. Max support two clients. 4.5.5 Path Figure 4-38 Path...

  • Page 53: System

    4.6 System 4.6.1 General 4.6.1.1 General The general interface is shown as in Figure 3-27. Figure 4-39 General Please refer to the following sheet for log parameter information. Parameter Function Device name Set device name. Select language and then close IE. When you log in again, system language will Language change.
  • Page 54 Figure 4-40 Date&Time Please refer to the following sheet for log parameter information. Parameter Function Date format Select date format. Time format Select time format. Current time Set current system time. Setup becomes effective immediately. Sync PC Sync system time with PC time. Click on save to refresh system time. DST enable Set DST, may by date or week.

  • Page 55: Account

    Update period Set device update period. 4.6.2 Account 4.6.2.1 Account Figure 4-41 Account The account interface is shown as in . Here you can add and delete username, and modify user password. Figure 4-41 Account Anonymous login: Enable anonymous login as input IP without username and password to log in device. This type of account only have preview right.
  • Page 56 Figure 4-42 Add User Modify user: Modify existing user’s group, password, right and note. See Figure 4-43 Modify User...
  • Page 57 Figure 4-43 Modify User Modify password: Modify password of existing user. Check box in front of modify password. Input current password and then input new password. Click on save. Password supports 0~15 characters, including letter and number only. Note:  You cannot modify right of the logged in account.

  • Page 58: Default

    Figure 4-45 Add Group Modify group: Click on modify, you may edit group in prompt box. The modify group interface is shown Figure 4-46 Modify Group as in Figure 4-46 Modify Group Note:  You cannot delete admin and user groups. ...

  • Page 59: Import/Export

    Figure 4-47 Default The default interface is shown as in Figure 4-47 Default Note: Network IP address cannot be restored to default. 4.6.4 Import/Export Figure 4-48 Import/Export The import/export interface is shown as in Figure 4-48 Import/Export Please refer to the following sheet for log parameter information. Parameter Function Export...

  • Page 60: Upgrade

    Figure 4-49 Auto Maintain User can automatically reboot system and delete old files. You shall set auto reboot schedule and set file time period for auto delete old file to delete file within certain time periods. Click on save to make setup effective.

  • Page 61: Log

    Figure 4-51 Version Here displays device type, software version and soft build time. All info here subject to actual condition. 4.7.2 Log The log interface is shown as in Figure 4-52 Log. Note: Once number of log reaches 1024, it starts to overwrite the earliest log. Figure 4-52 Log Please refer to the following sheet for log parameter information.

  • Page 62: Online User

    Parameter Function Start time Set start time of log to search. End time Set end time of log to search. Type Log type includes: system, config, data, event, record, account and clear all log. Search  In dropdown list, select log type, and set start/end time. Click on search button and then you will see logs searched out.

  • Page 63: Alarm

    5 Alarm Click Alarm tab, the system shows Alarm tab. Here you can select alarm type, operation and sound to view existing alarm time, type and channel. Figure 5-1 Alarm Type Parameter Note Disk Full When disk is full, it triggers alarm. Disk Error When disk has error, it triggers alarm.

  • Page 64: Logout

    6 Logout Figure 6-1 Logout Click on logout to exit WEB interface. You will see . To return web interface, you have to log in again. Figure 6-1 Logout...

This manual is also suitable for:

Itc237-pu1b-lItc237-pw1b-irz

Table of Contents