Section 8. Optional Accessories; Pcmcia Memory Cards - SATO M10e Operator's Manual

This section contains instructions for using the following features:

• PCMCIA Memory Cards

• Cutter
PCMCIA MEMORY CARDS
DESCRIPTION
The Memory Card Option provides the connectors and interface board for one PCMCIA
memory cards slots. The printer memory can be expanded up to 16MB.
Type
Applicable Specifications
Size
Connector Pins
Battery
Write Protect
Low Battery Detect
INSTALLATION
Instructions for installing the Memory Card Option are included with the installation kit.
SATO M10e
SECTION 8.
OPTIONAL ACCESSORIES
SRAM or Flash-ROM
PCMCIA Version 2.1 (JEIDA Version 4.1)
Up to 4 MB SRAM or 16MB Flash ROM
68
Two years for SRAM type (approximately)
Yes
Yes (SRAM only)
PN 9001011 Rev. A Page 8-1