SATO M10e Operator's Manual page 40

Section 3. Configuration
CARD->MEMORY
COPY COPYING
CARD->MEMORYCOPY
COMPLETED
CARD COPY/FORMAT
XXXXXXX ERROR
MEMORY->CARDCOPY
ALL <0MB>
COPY START
YES
MEMORY->CARDCOPY
COPYING
MEMORY->CARDCOPY
COMPLETED
CARD COPY/FORMAT
XXXXXXX ERROR
CARD->MEMORYCOPY
PROGRAM
COPY START
YES
Page 3-18
3. Press the ENTER key to accept the selection. If Yes was
selected the copy process will start
4. Once the copy process is completed, press the ENTER key
to step the display.
5. If an error is encountered in the copy process, one of the
following messages will be displayed on the second line:
R/W Error
No Card Error
Mem Full Error Indicates that there is insufficient memory
This selection allows you to copy the entire contents of the
Y/N
optional Expanded Memory to the PCMCIA Memory card
installed in the Memory Card slot on the rear of the printer.
1. Use the Cursor keys to step the cursor to desired setting. If
Yes is selected, the printer will enter the Card Copy mode. If
No is selected, the display will advance to the Card to
Memory Copy All mode.
2. Confirm your selection by stepping the cursor to the Yes
NO selection. If you select No, the display will return to the
previous selection.
3. Press the ENTER key to accept the selection. If Yes was
selected the copy process will start
4. Once the copy process is completed, press the ENTER key
to step the display.
5. If an error is encountered in the copy process, one of the
following messages will be displayed on the second line:
R/W Error
No Card Error
Mem Full Error Indicates that there is insufficient memory
This selection allows the user to copy printer firmware from the
Y/N
PCMCIA Memory Card to the printer.
1. Use the Cursor keys to step the cursor to desired setting. If
Yes is selected, the printer will enter the Card Copy mode. If
No is selected, the display will advance to the mode display.
2. Confirm your selection by stepping the cursor to the Yes
NO selection. If you select No, the display will return to the
previous selection.
PN 9001101 Rev. A
Indicates a Read/Write error occured
Indicates no card was recognized
available.
Indicates a Read/Write error occured
Indicates no card was recognized
available.
SATO M10e