SATO M10e Operator's Manual page 39

TRUETYPE
FONTCOPY
COMPLETED
CARD COPY/FORMAT
XXXXXXX ERROR
CARD->MEMORYCOPY
SATOFONT
COPY START
YES
SATO FONT COPY
COPYING
SATO FONT COPY
COMPLETED
CARD COPY/FORMAT
XXXXXXX ERROR
MEMORY->CARDCOPY
ALL
COPY START
YES
SATO M10e
4. Once the copy process is completed, press the ENTER key
to step the display.
5. If an error is encountered in the copy process, one of the
following messages will be displayed on the second line:
R/W Error
No Card Error
Mem Full Error Indicates that there is insufficient memory
This selection allows you to copy SATO fonts from the PCMCIA
Y/N
Memory card installed in the Memory Card slot on the rear of the
printer to the optional Flash ROM.
1. Use the Cursor keys to step the cursor to desired setting. If
Yes is selected, the printer will enter the Card Copy mode. If
No is selected, the display will advance to the Card to
Memory Copy All mode.
2. Confirm your selection by stepping the cursor to the Yes
NO selection. If you select No, the display will return to the
previous selection.
3. Press the ENTER key to accept the selection. If Yes was
selected the copy process will start
4. Once the copy process is completed, press the ENTER key
to step the display.
5. If an error is encountered in the copy process, one of the
following messages will be displayed on the second line:
R/W Error
No Card Error
Mem Full Error Indicates that there is insufficient memory
This selection allows you to copy the entire contents from the
<0MB> Y/N
PCMCIA Memory card installed in the Memory Card slot on the
rear of the printer to the optional internal Expanded Memory.
1. Use the Cursor keys to step the cursor to desired setting. If
Yes is selected, the printer will enter the Card Copy mode. If
No is selected, the display will advance to the Card to
Memory Copy All mode.
2. Confirm your selection by stepping the cursor to the Yes
NO selection. If you select No, the display will return to the
previous selection.
PN 9001101 Rev. A
Section 3. Configuration
Indicates a Read/Write error occured
Indicates no card was recognized
available.
Indicates a Read/Write error occured
Indicates no card was recognized
available.
Page 3-17