Specifications - SATO M10e Operator's Manual

Section 1: Overview
GENERAL PRINTER SPECIFICATIONS
SPECIFICATION
PRINT
Method
Speed (User Selectable)
Print Module (Dot Size)
Resolution
Maximum Print Width
Maximum Print Length
MEDIA
Minimum Width
Minimum Length
Maximum Width
Type
Maximum Caliper
Roll OD (max) Face-In
Core ID (min)
SENSING
See-Thru
Reflective Eye-Mark
Continuous Form
RIBBON
Widths
Length (max)
Thickness
Page 1-2
M10e
Direct or Thermal Transfer
2 to 10 ips
50 to 125 mm/s
..0033 in.
.083 mm
309 dpi
12 d/mm
10.5 in.
266 mm
16.5 in.
420 mm
5.16 in.
131 mm
1.7 in.
43 mm
11.8 in.
300 mm
Roll or Fan-Fold Die Cut Labels
Thermally Sensitive for M10eDT
0.008 in.
0.21 mm
7.8 in.
200 mm
76.2 mm
Fixed, 0.9 in. (22.5 mm) left of center
Fixed, 0.2 in. (5 mm) from left label edge
Not Used
6.5 in. (165 mm), 8.7 in. (220 mm), 10.7 in.(273 mm)
984 ft. (300 m)
4.5 micron, Wound Face-In
PN 9001101 Rev. A
3 in
SATO M10e